Joined: Sat Sep 03, 2005 5:49 pm Posts: 84 Location: So. Maine
So I was checking to see if Got Some from Boston made the final cut - and maybe it's the fog of January 1, but did Got Some not make it somehow? I don't see it listed at all.
_________________ ...there's a lot to be said for nowhere...
Joined: Sun Oct 17, 2004 4:51 am Posts: 6944 Location: Long Island Gender: Male
jdmaine wrote:
So I was checking to see if Got Some from Boston made the final cut - and maybe it's the fog of January 1, but did Got Some not make it somehow? I don't see it listed at all.
Joined: Thu May 22, 2008 2:11 am Posts: 124 Location: Victoria B.C. Gender: Male
lowlight79 wrote:
jdmaine wrote:
So I was checking to see if Got Some from Boston made the final cut - and maybe it's the fog of January 1, but did Got Some not make it somehow? I don't see it listed at all.
''
It made it.
Is there more discs to come? I don't see Got Some either.
Joined: Tue Nov 23, 2004 6:28 pm Posts: 5361 Location: St. Paul Gender: Male
since i don't have enough blanks, i've listened to just one disc so far, the 3b disc with the bonnaroo porch. what the fuck is going on with the guitar in little wing? seeing this version was from a southern california 09 show where a few different people showed up during that run of shows, i assume there was a guest, because it sure doesn't sound like stone or mike playing, but i could be wrong. whoever it is, though, sounds fucking terrible. crown of thorns wasn't very good, either. that black red yellow, though, is smokin.
since i don't have enough blanks, i've listened to just one disc so far, the 3b disc with the bonnaroo porch. what the fuck is going on with the guitar in little wing? seeing this version was from a southern california 09 show where a few different people showed up during that run of shows, i assume there was a guest, because it sure doesn't sound like stone or mike playing, but i could be wrong. whoever it is, though, sounds fucking terrible. crown of thorns wasn't very good, either. that black red yellow, though, is smokin.
Ha! I listened to that San Diego show the other week, and it is a pretty good show, but you are right, that Little Wing just sounds awful. I guess it is Eddie's guitar teacher playing the rhythm guitar, and it sounds like he: 1. Isn't too good, and 2. doesn't have a monitor or something and is a 1/2 beat behind everyone. There must have been SOMETHING going on to impede his ability to play well, because it is just embarrassing, especially when you have Mike step up with one of his amazing solos and the disparity between the two is laughable.
Joined: Fri Oct 22, 2004 3:25 am Posts: 2011 Location: Chandler, AZ Gender: Male
track12 wrote:
AndySlash wrote:
since i don't have enough blanks, i've listened to just one disc so far, the 3b disc with the bonnaroo porch. what the fuck is going on with the guitar in little wing? seeing this version was from a southern california 09 show where a few different people showed up during that run of shows, i assume there was a guest, because it sure doesn't sound like stone or mike playing, but i could be wrong. whoever it is, though, sounds fucking terrible. crown of thorns wasn't very good, either. that black red yellow, though, is smokin.
Ha! I listened to that San Diego show the other week, and it is a pretty good show, but you are right, that Little Wing just sounds awful. I guess it is Eddie's guitar teacher playing the rhythm guitar, and it sounds like he: 1. Isn't too good, and 2. doesn't have a monitor or something and is a 1/2 beat behind everyone. There must have been SOMETHING going on to impede his ability to play well, because it is just embarrassing, especially when you have Mike step up with one of his amazing solos and the disparity between the two is laughable.
Yeah, it was a real bummer to experience that song live and just have it butchered. 7-9-95 was one of my first bootlegs and to just hear Mike tear it up and hope to hear that song someday, and end up getting that was a total letdwon.
Joined: Tue Nov 23, 2004 6:28 pm Posts: 5361 Location: St. Paul Gender: Male
speaking of the art, what's the best program to print these out in? i've typically just used mspaint to print in the past, but i can't get the right dimensions on this without losing a lot of fidelity and having to trim the sides.
Joined: Thu Aug 02, 2007 4:12 am Posts: 721 Location: Sydney / Melbourne
AndySlash wrote:
speaking of the art, what's the best program to print these out in? i've typically just used mspaint to print in the past, but i can't get the right dimensions on this without losing a lot of fidelity and having to trim the sides.
Photoshop is definitely the best program to print them with, but I suspect not everyone would have that. If you open them with Google Chrome, it appears to print them in full resolution and at the correct size.
If anyone is attempting to print the chipboard covers, they need to be re-sized to 11cm high, instead of 10cm.
Blank chipboards can be ordered from Kufala by contacting them through their website. Blank 2CD covers are $1 each and blank PJ-2008 triple gatefold covers are $3 each (HIGHLY recommended )
Joined: Tue Nov 23, 2004 6:28 pm Posts: 5361 Location: St. Paul Gender: Male
ridleybradout wrote:
AndySlash wrote:
speaking of the art, what's the best program to print these out in? i've typically just used mspaint to print in the past, but i can't get the right dimensions on this without losing a lot of fidelity and having to trim the sides.
Photoshop is definitely the best program to print them with, but I suspect not everyone would have that. If you open them with Google Chrome, it appears to print them in full resolution and at the correct size.
If anyone is attempting to print the chipboard covers, they need to be re-sized to 11cm high, instead of 10cm.
Blank chipboards can be ordered from Kufala by contacting them through their website. Blank 2CD covers are $1 each and blank PJ-2008 triple gatefold covers are $3 each (HIGHLY recommended )
thanks. yeah, no photoshop here. chrome did the trick for the trays, but not the booklets for some reason- it resized those to 4 1/16" x 8 1/8". i'll just use paint for those- less concerned about resolution loss on those since the trays (with set information) printed fine.
edit: i take that back- chrome resized the trays to just over the right height and about 1/2" too long. i should have measured length- i had just matched the height by sight before posting. so, still need to find something.
Joined: Thu Aug 02, 2007 4:12 am Posts: 721 Location: Sydney / Melbourne
AndySlash wrote:
thanks. yeah, no photoshop here. chrome did the trick for the trays, but not the booklets for some reason- it resized those to 4 1/16" x 8 1/8". i'll just use paint for those- less concerned about resolution loss on those since the trays (with set information) printed fine.
edit: i take that back- chrome resized the trays to just over the right height and about 1/2" too long. i should have measured length- i had just matched the height by sight before posting. so, still need to find something.
Adobe Reader! (I really should've thought of that earlier ) Just set print settings to landscape and page scaling to 'none'
Post subject: Re: Lowlight79's 2010 Mixer (Disc 3 and 4A notes added)
Posted: Thu Jan 06, 2011 1:29 am
Johnny Guitar
Joined: Mon Aug 01, 2005 11:13 pm Posts: 157
I've been listening to this off and on for a couple days now. Almost through it once, but not quite. I have to say this is OUTSTANDING! Thank you very much for all of the time and work you spent on this.
Post subject: Re: Lowlight79's 2010 Mixer (Disc 3 and 4A notes added)
Posted: Thu Jan 06, 2011 5:02 am
Bootleg Artist
Joined: Thu Aug 02, 2007 4:12 am Posts: 721 Location: Sydney / Melbourne
I'd like to congratulate Lowlight79 on what I believe to be his best compilation yet. We are very fortunate to have someone with the dedication, skill and patience to create such an amazing and creative listening experience for us fans. As evidenced by his notes, a lot of time and thought goes into every inclusion and sequencing decision. If you can imagine how many hours went into this - double it and you are probably closer to the mark
I'd also like to publically thank him for giving me the opportunity to create some artwork for this project, I only hope that it came out as professionally as his work deserves.
Have just finished putting together the Kufala style 'chipboard' version myself - here are the results:
Users browsing this forum: 10Club Management and 8 guests
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum