I'd like to get some more RAM for my machine, however, I have no idea what exactly I need. I have:

Operating System System Model
Windows XP Home Edition Service Pack 1 (build 2600) SYX snc302eeh
Enclosure Type: Desktop
Processor a Main Circuit Board b
2.67 gigahertz Intel Pentium 4
8 kilobyte primary memory cache
512 kilobyte secondary memory cache Board: Biostar Group M7VIT Pro Via KT400/8235
Bus Clock: 133 megahertz
BIOS: Phoenix Technologies, LTD 6.00 PG 09/04/2003
Drives Memory Modules c,d
280.06 Gigabytes Usable Hard Drive Capacity
32.38 Gigabytes Hard Drive Free Space

PLEXTOR DVDR PX-740A [CD-ROM drive]
SONY DVD RW DW-U14A [CD-ROM drive]
3.5" format removeable media [Floppy drive]

SAMSUNG SP0802N [Hard drive] (80.06 GB) -- drive 0, s/n S00JJ10W819970, rev TK100-23, SMART Status: Healthy
WDC WD2000JB-00GVA0 [Hard drive] (200.05 GB) -- drive 1, s/n WD-WCALL1103098, rev 08.02D08, SMART Status: Healthy 480 Megabytes Installed Memory

Slot 'A0' has 512 MB
Slot 'A1' is Empty

http://www.biostar.com.tw/products/main ... 7VIT%20Pro

MEMORY
# Maximum 3.0 GB
# 3 x 184-pin DDR SDRAM DIMM
# DDR 200/266/333/400<---these are your choices, youll have to take a look at your ddr memory chip though if its okay, then add up with one of the ddram already installed. Or better yet buy a 1GB DDR 400 (PC3200) and eliminate the old one already installed, keep it as a reserve if you want to.

Hope that helps.

Thanks! That helps alot!